Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
10
i) Customers can use the four lifting rings at the top of the product or the four casters at the bottom
to lift or move the product. Before lifting the laser source, make sure that the four lifting rings are
installed firmly and reliably. When lifting the laser source, be sure to use the four lifting rings;
when pushing the laser source, please make sure that the support block at the bottom of the
horizontal adjustment caster is off the ground. After the laser source is positioned, adjust the
support block to make it contact the ground to avoid displacement of the laser source. As shown
in Figure 5.
a) Lifting ring
b) Leveling casters
Figure 5 Laser top lifting ring and bottom level adjustment caster
CAUTION:
All the cables can only be connected when power supply is off. Hot plug
may damage the device.
CAUTION:
a) The placement of the laser output cable should be as natural as possible, and the
output cable should not be twisted.
b) If the coil diameter of the fiber delivery cable connector is too small, it will damage
the laser.
Liftingring
Liftingring
Leveling casters
Leveling casters
