Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
46
Select IP address of corresponding laser, and then double-click. PC software will take
communication with selected laser. After the communication established, the bottom status shows that the
network connection is ok, shown in Figure 31.
Figure 31 communication status interface between PC software and laser
8.2.1 Add/delete laser
In the PC software, right-click in the laser list area to add/delete lasers. When adding a laser, you
need to enter the IP address of the added laser. The specific operation is shown in Figure 32.
a
）
b)
Figure 32 Procedure for adding a laser to the PC software
