SBGuidance Auto I Rev. A I CAN
SBG-Auto CAN-EN-Rev. A I Page 47/52
8.
Mounting the terminal
The following guidelines have been established for
mounting the terminal (Figure 51):
Always contact the customer about the
terminal position in the cabin.
Always use a RAM-D or RAM-C ball
attachment.
Mount the terminal free of vibrations with a
solid bracket. A variety of mounting brackets
are available for this purpose.
Conceal all cables in one pillar (e.g. A-pillar or
B-pillar).
Mount in such a way that the display is
directed straight towards the driver.
Mount in such a way that driver has a clear
view all around.
Tip!:
Mount the terminal in such a way that it does
not obstruct the view of the driver over the top
of the right-hand fender, but also so that the
inside of the front wheel on the ground is still
clearly visible.
Figure 51 Viper 4+ mounted to A-pillar.
Figure 52 GeoStar terminal mounted to ISO
attachment of A-pillar.
Summary of Contents for SBGuidance Auto
