SBGuidance Auto I Rev. A I CAN
Page28/52 I SBG-Auto CAN-EN-Rev. A
4.4.2
ISOBUS RoadSwitch
The ISOBUS RoadSwitch (Figure 19) can be used as a
master switch, which switches ACT-power and ECU-
power off during road transport.
The ISOBUS RoadSwitch can also be used to connect
an ISOBUS Virtual Terminal. With this module the
tractor is actually ISOBUS Ready. The ISOBUS
implement can be connected directly to the SBG IBBC
connector on the back of de tractor.
The RoadSwitch has a T-cable which should be
mounted in between the harness in-cab VPR4 ISO
(11158000064) and the harness in-cab DynamIQ ISO
(11158000063). The RoadSwitch should be installed on
a clearly visible and easily accessible position (Figure
19).
4.4.3
Remote Go
To active the steering system it is possible to mount an
external button (SBG13710-20; Figure 20). This button
can be installed in the armrest or console of the
machine and should be connected to the DynamIQ
ISO. For this option a SmartRemote license is
necessary.
For more information about the installation and
configuration in the software, see the: ‘016-8000-
037NL-A Configuration manual – IO Controller
DynamIQ’.
Figure 19 Raven Roadswitch.
Figure 20 Remote GO.
Summary of Contents for SBGuidance Auto
