![background image](http://html.mh-extra.com/html/raven/autoboom/autoboom_calibration-and-operation-manual_788802049.webp)
Manual No. 016-0130-076 Rev. C
45
FIGURE 6.
Plug and Solenoid Reinstallation
7.
Set the Raven OS device to operate the AutoBoom feature in PowerGlide Plus mode. Review the
section on page 14 to properly configure the Raven OS.
Note:
When converting the AutoBoom system back to UltraGlide mode, the orifice fittings must be re-
installed and the Raven OS must be reset to operate in UltraGlide mode.