Ravelli BLOCK 7 STONE, Installation, Operation And Maintenance Manual

Page: 175 / 192

175
ENGLISH
17.2 STATUS VIEWS
ICON STATUS DESCRIPTION
On
Valid connection to the Cloud service, with indication of signal
quality
Increasing animation Wi-Fi connecting or invalid Wi-Fi parameters
Off Wi-Fi parameters not entered
Off Stove off
Switching on animation Stove in switching on phase
Switching off animation Stove in automatic switching off phase
Flashing Stove in test phase or warm start request needs confirming
On Stable flame and stove in work
On Weekly programmer on and active
Flashing
Switching on/Switching off from weekly programmer
intervention
Quick flashing Weekly programmer not set correctly
On Tangential fan active on zone 1
On
Technical intervention requested due to expired scheduled
maintenance threshold
Flashing Stove in test mode
Flashing Stove in alarm (the relative alarm code will appear*)
On Stand-by function enabled
Flashing Powering on /Shutting down if stand-by active
Off Stove off
On Stove on
* See outlining table of possible anomalies
17.3 POSSIBLE OPERATIONS
The following operations are possible from the
home page:
ICON PRESSURE VIEW/SETTING VALUES
Short View current time
Long
Stove on/off (in normal operation and/or for restart after
a fault)
on, oFF
Long Enter the user menu
See “User menu”
paragraph
Short
Desired zone 1 temperature setting using keys or
Default: 20 °C
Minimum: 0 °C
Maximum: 40 °C
Auto/manual mode setting (if thermostat active) using
keys or
F Aut, F nor
Short
Stove power setting using keys or
Default: P 100
Minimum: P 1
Maximum: P 100
Long Start preload cycle (if stove on off, no alarms) LoAd