Ravaglioli PLUS91S, Instruction Manual

Page: 9 / 34

7700-M002-3
GB
ASSEMBLING AND USE
INSTRUCTIONS
Page 9 of 22
PLUS91S - PLUS91N
PLUS91SE - PLUS91SA - G800A69
7.2.4 Plus91SA device installation
Before carrying out any operation it’s obbligatory to
cut the voltage to the tyre demounting machine.
Fasten the Plus91SA Device (
Fig. 10 pos. 1
) to the ma-
chine, as shown in figure, utilizing the screws (# 203058)
(
Fig. 10 pos. 2 ), (# 203038) ( Fig. 10 pos. 3 ), the wash-
ers (# 236007) ( Fig. 10 pos. 4 ), (# 236006) ( Fig. 10
pos. 5 ) and the nuts (# 228307) ( Fig. 10 pos. 6 ).
7.2.5 G800A69 lifting device installation
Before carrying out any operation it’s obbligatory to
cut the voltage to the tyre demounting machine.
Unscrew the cylinder fastening screw (
Fig. 11 pos. 2
)
and the screws (
Fig. 11 pos. 3
) fixing the lower bracket
( Fig. 11 pos. 4 ) to the machine. Downwards remove the
bracket ( Fig. 11 pos. 4 ) from the shaft ( Fig. 11 pos. 5 ).
Fix the lifting unit ( Fig. 11 pos. 1 ) to the device, accord-
ing to the figure indications. In the end, fix again the
lower bracket: carry out the previously described opera-
tions in reverse order.
Fix on the lateral side of the demounting machine frame
the rotation stopper (
Fig. 11 pos. 6 ), as shown in fig-
ure, using the screws ( Fig. 11 pos. 7 ), the washers ( Fig.
11 pos. 8 ) and the nuts ( Fig. 11 pos. 9 ) supplied. Use
the casing-fixing screw ( Fig. 11 pos. 10 ) to fix the lower
side of the rotation stopper (
Fig. 11 pos. 6
).
Fig. 10
Fig. 11