7700-M002-3
GB
ASSEMBLING AND USE
INSTRUCTIONS
Page 10 of 22
PLUS91S - PLUS91N
PLUS91SE - PLUS91SA - G800A69
Apply the voltage again to the machine.
WHEN THE ASSEMBLY PROCEDURES ARE COM-
PLETE, MAKE A CHECK ON ALL MACHINE FUNC-
TIONS.
IN CASE OF DOUBTS DON’T UTILIZE THE MA-
CHINE AND CALL SKILLED TRAINED PERSON-
NEL OR THE JOBBER.
Fig. 15
d - Interpose between the two pipe sections (
Fig. 15 pos.
1A - 1B
) the “V”union (
Fig. 15 pos. 2
) (#325181).
Insert the reduction (
Fig. 15 pos. 3
) (#325054) and
connect the pipe (
Fig. 15 pos. 4
) coming from the
Plus device control valve to the “V” union (
Fig. 15
pos. 2
).
c - Cut off the pipe (
Fig. 14 pos. 1
) as shown in
Fig. 14
.
Fig. 14
7.3
Pneumatic connection
a - Fix with a clamp (
Fig. 12 pos. 4
) the union (
Fig. 12
pos. 1
) on the lateral duct (
Fig. 12 pos. 3
), exploiting
the black pipe (
Fig. 12 pos. 2
) that comes out from
it.
Fig. 12
b - In case of connection with tubeless inflation ma-
chine, it is advisable to introduce the black pipe (
Fig.
13 pos. 1
) through the hole placed on the tank sup-
port (
Fig. 13 pos. 1
).
Fig. 13
1
3
4
2
1
2
