7700-M002-3
GB
ASSEMBLING AND USE
INSTRUCTIONS
Page 8 of 22
PLUS91S - PLUS91N
PLUS91SE - PLUS91SA - G800A69
7.2.2 Plus91N device installation
Before carrying out any operation it’s obbligatory to
cut the voltage to the tyre demounting machine.
Fasten the Plus91N Device (
Fig. 8 pos. 1
) to the ma-
chine, as shown in figure, utilizing the screws (# 203058)
(
Fig. 8 pos. 2
), the nuts (# 228307) (
Fig. 8 pos. 3
) and
the washers (# 236007) (
Fig. 8 pos. 4
).
The pin (
Fig. 8 pos. 5
) will substitute the one already
placed on the column unit (
Fig. 8 pos. 6
).
Fig. 8
7.2.3 Plus91SE device installation
Before carrying out any operation it’s obbligatory to
cut the voltage to the tyre demounting machine.
Fasten the Plus91SE Device (
Fig. 9 pos. 1
) to the ma-
chine, as shown in figure, utilizing the screws (# 203058)
(
Fig. 9 pos. 2
), (# 203038) (
Fig. 9 pos. 3
), the washers
(# 236007) (
Fig. 9 pos. 4
), (# 236006) (
Fig. 9 pos. 5
)
and the nuts (# 228307) (
Fig. 9 pos. 6
).
Fig. 9