EN
Page 56 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
15.0 USER MENU (OPTIONS AND CALI-
BRATION)
From the main page “Home” press the button
to move to the next screen page and the button
to access the user menu. On the monitor, the follow-
ing screen appears where you can enter the password.
The user login password is:
1234
.
After entering the correct password you will see the
following screen:
KEY
1 – Options menu push button
2 – Calibrations menu push button
Fig. 69
1
2
14.11 Wheel balancing in Motorcycle mode
(with distance caliper extension Kit)
By enabling “motorcycle wheel balancing” function, the
wheel balancers can also balance motorcycle wheels.
Before detecting the wheel sizes (see Par. 14.2.2), se-
lect motorcycle wheel balancing mode proceeding as
described below:
press button
and then button
. On the
screen that appears, press the button
to switch
to programs and measurements acquisition selection
screen below.
Use arrows
and/or
to select the mode
desired.
At the end press push button
.
The machine will be configured as follows to perform
the measurement in the desired mode and on the
screen will appear an indication showing the measures
that will be acquired.
The "motorcycle" mode automatically recalculates
the wheel distance measurement, increasing it by the
length of the extension supplied with distance caliper
extension kit (kit available on demand).
THE EXTENSION MUST BE FIT-
TED ONLY WHEN BALANCING IS
PERFORMED IN "MOTORCYCLE"
MODE.
TO MOUNT THE EXTENSION AND
THE COMPONENTS OF CALIPER
EXTENSION KIT, PLEASE REFER
TO THE SPECIFIC INSTRUCTIONS
INCLUDED IN THE KIT.
Balancing procedures are identical for both modes
(car/motorcycle).
By selecting motorcycle mode, besides DYNAMIC bal-
ancing (see Par. 14.7.4) STATIC balancing and/or ALU-
S (Par. 14.7.1 and/or 14.7.5) can also be performed.
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
