Operation QUANTRON-A
79
4
4.10.7 Change unit system
The system of units has been preset at the factory. However, the system can be
changed from metric to imperial units at any time.
1.
Open
System/test
menu.
2.
Select the
Unit
menu.
3.
Press the
enter key
to switch between
imperial
and
metric
.
All values of the various menus are converted.
4.10.8 Service
4.11
Information
Information on the machine control can be obtained from the Info menu.
Menu/value
Conversion factor
metric to imperial
residual kg
1 x 2.2046 lb.-mass (lbs rest)
residual ha
1 x 2.4710 ac (ac rest)
Working width m
1 x 3.2808 ft
Application rate kg/ha
1 x 0.8922 lbs/ac
Mounting height cm
1 x 0.3937 in
Menu/value
Conversion factor
imperial to metric
residual lbs
1 x 0.4536 kg
residual ac
1 x 0.4047 ha
Working width ft
1 x 0.3048 m
Application rate lbs/ac
1 x 1.2208 kg/ha
Mounting height in
1 x 2.54 cm
NOTICE
An input code is required to adjust the settings in the
Service
menu. These set-
tings can only be modified by authorised service personnel.
As a general rule, we recommend that all settings in this menu are carried out
by authorized service personnel.
NOTICE
This menu provides information on the configuration of the machine.
The information list depends on the equipment of the machine.
Summary of Contents for QUANTRON-A AXIS-M 20 Q
