Test result Fertilizer distribution
Action, test
Case B
Fertilizer quantity decreases from right to
left (or vice versa).
Are the spreading vanes set uniformly on
the right and left?
Are the settings of the metering slide the
same on the left and right?
Are the track distances the same?
Are the tracks parallel?
Was there a strong side wind during the
test?
Case C
Too little fertilizer in the center.
Reduce the amount of fertilizer in the
overlap zone:
u
Set the second spreading vane
indicated in the fertilizer table back (to
lower numbers).
w
e.g. C3-B2 to setting C3-B1.
u
If correction of the angle of the second
spreading vane indicated is not
sufficient, shorten the spreading vane
length.
w
e.g. C3-B1 to setting C3-A1.
Case D
Too little fertilizer in the overlap zones.
Reduce the amount of fertilizer in the
tractor track:
u
Set the second spreading vane
indicated in the fertilizer table forward
(to higher numbers).
w
e.g. E4-C1 to setting E4-C2.
u
If correction of the angle of the second
spreading vane indicated is not
sufficient, increase the spreading vane
length.
w
e.g. E4-C2 to setting E4-D2.
Setting the spreading vanes, see
•
1 to 6: Angle settings
•
A to E: Length settings
If the result is not achieved even despite
adjustment of the second spreading vane
indicated, the
first spreading vane
indicated can also be adjusted.
9. Spreading operation
MDS 8.2/14.2/18.2/20.2
5902916
93
Summary of Contents for MDS 8.2
Page 150: ......
