On the full border spreading side
, both spreading vanes should be set to the value specified in
the fertilizer chart.
On the field-interior spreading side, the spreading vanes of the other spreading disc remain
in their position.
u
The following settings are to be applied to the machine according to the fertilizer chart:
Mounting height
50/50 (A = 50 cm, B = 50 cm)
Metering slide adjustment
160
PTO speed
540 rpm
Spreading vane settings
Full border spreading side
A3-A3
Other spreading disc
(Normal fertilizing position):
C3-B2
n
Example of field spreading during late fertilizing:
Fig. 46: Field spreading during late fertilizing
During field spreading in late fertilizing mode, a symmetrical spreading pattern is produced. When the
spreader is correctly set (see information in the fertilizer charts), the fertilizer is spread evenly over the
field.
Specified parameters
Type of fertilizer
ENTEC 26 COMPO BASF
Working width
12 m
Spreading disc type
M1
Forward speed
10 km/h
Application rate
300 kg/ha
The following settings are to be applied to the machine according to the fertilizer chart:
9. Spreading operation
MDS 8.2/14.2/18.2/20.2
5902916
83
Summary of Contents for MDS 8.2
Page 150: ......
