Rauch AERO GT ISOBUS, Operator'S Manual

Page: 41 / 66

Operation AERO GT ISOBUS
37
4

Important information on the use of the operating modes during spreading is
provided in chapter
5: Spreading operation with the machine control unit
AERO GT ISOBUS, page 55 .
4.6.2 +/- appl. rate
In this menu, you can specify the increment of the percentage change in
application rate for the normal spreading type.
The base (100%) is the preset value for the opening of the metering slider.
Defining the quantity reduction:
1.
Call up the Machine settings > +/- appl. rate (%) menu.
2. Enter the percentage by which you wish to change the application rate.
3. Press OK .
NOTICE
We recommend displaying the flow factor on the operating screen. In this way,
you can monitor the mass flow control during the spreading work. See chapter
2.1.2: Display fields, page 7 and chapter 4.6.1: AUTO/MAN mode, page 36 .
NOTICE
During operation, you can use the Appl. rate + / Appl. rate - function keys to
change the application at any time by the factor entered in +/- appl. rate .
With the C 100% key , you can restore the pre-settings.