Rauch AERO GT ISOBUS, Operator'S Manual

Page: 44 / 66

Operation AERO GT ISOBUS 4
40
Subsequently, the number of pulses of the forward speed signal has to be
defined. If the exact number of pulses is known, you can enter it directly:
5. Call up the Pulses/100m menu item from the selected tractor profile.
 The display shows the Pulses menu for the manual input of the pulse
count.
If you do not know the exact number of pulses, you can start a calibration run .
6. Press the calibration key in the tractor profile.
 The calibration run working screen is shown on the display.
7. Press the Start key at the starting point of the reference track.
 The pulse display is now zero.
 The control unit is ready to count pulses.
8. Drive along a 100 m long reference track.
9. Stop the tractor at the end of the reference track.
10. Press the Stop key .
 The number of received pulses is displayed.
 The new pulse count is saved.
 This returns you to the profile menu.