Rauch AERO GT ISOBUS, Operator'S Manual

Page: 40 / 66

Operation AERO GT ISOBUS 4
36
4.6.1 AUTO/MAN mode
The machine control unit controls the metered rate automatically based on the
speed signal. In doing so, it takes into account the application rate, the working
width and the flow factor.
By default, you work in
automatic mode.
You are working in manual mode only:

If there is no speed signal (radar or wheel sensor not available or defective),

when spreading slug pellets or seeds (fine seeds).
Selecting the operating mode
1.
Start the AERO GT ISOBUS machine control unit.
2. Open the menu Machine settings > AUTO/MAN mode .
3. Select the desired menu item from the list.
4. Press OK .
5. Follow the instructions on the screen.
NOTICE
For even spreading of the spreading material, you need to work at a constant
forward speed in manual mode.
NOTICE
Spreading work with the different operating modes can be found in the chapters
5: Spreading operation with the machine control unit AERO GT ISOBUS,
page 55
.
Menu Meaning
AUTO km/h Selection of automatic mode
MAN km/h Forward speed adjustment for manual mode