Rauch AERO GT ISOBUS, Operator'S Manual

Page: 59 / 66

Spreading operation with the machine control unit AERO GT ISOBUS
55
5
5 Spreading operation with the machine control unit
AERO GT ISOBUS
The AERO GT ISOBUS machine control unit supports you in setting the machine
before you start work. During spreading, the functions of the machine control unit
are also active in the background. The quality of the fertiliser spreading can be
monitored using them.
5.1 Displaying the spreading type in the working screen
You can adjust the section widths when activating or deactivating the section
widths. These settings can be enabled directly in the working screen. This allows
you to optimally adapt the field requirements during spreading operation.
1. Keep pressing the function key until the desired working width is displayed.
Button Spreading type
Switch off the section width from left to centre
Activate the section width from the centre to the left
Switch off the section width from right to centre
Activate the section width from the centre to the right