Rato R80, Maintenance Manual, Page: 73 / 79

Part IV Disassembly and Maintenance
69
4-4-7 Starting control box
a. Disassembly and assembly
(Only for automatic starter specification)
6×12mm(2)
Special screw Control box
Silicon
rectifier
Control box
mounting rack
Locking nut
Safety plate (5A)
Assembly:
Before installation, check
whether it is about to burn out.
Oil alarm device
Assembly:
Carry out installation by aligning
the hole of the control panel.
Control panel
Reset switch (1A)
Assembly:
Be careful not to invert the left side
and the right side.
Combination switch
Assembly:
During installation, the protrusion at
the fastening thread should be aligned
with the notch of the mounting rack
and the control panel.
Combination switch
Protrusion