Rato R80, Maintenance Manual, Page: 43 / 79

Part IV Disassembly and Maintenance
39
③
. Hook the outer side of the starter coil spring installed in the drawstring coil cover in the
groove of the starter drawstring coil.
④
. Install the driving cam on the starter drawstring coil, then install the return spring in the
hole on the starter drawstring coil and hook its other end on the driving cam.
⑤
. Install the spring, the drive guide plate and the guide
plate fastening screw in sequence.
⑥
. Pull the drawstring out of the drawstring coil cover,
and make a "8" knot at the drawstring end.
⑦ Gently pull the starter drawstring handle to check
the performance of the driving cam.
Groove of drawstring coil
cover
Groove of starter
drawstring coil