Rato R80, Maintenance Manual, Page: 50 / 79

Part IV Disassembly and Maintenance
46
b. Disassembly and assembly
● Before the disassembly of the carburetor, the fuel drain bolt must be
unscrewed to drain off the fuel inside.
●
No Open Flames.
Choke lever
Fuel valve
Assembly:
Check the wear of the head and
the action of the spring before
installation.
Float valve
Fuel drain bolt
Mounting bolt
Make sure that
there is no fuel leakage after
installation.
Assembly:
Use the compressed air to
remove dirt in the passage
before installation.
Assembly:
Check the wear of
the front end first
before installation.
Throttle limit
screw
Adjusting screw of auxiliary air
Master nozzle
Assembly:
Use the compressed air to
remove dirt in the passage
before installation.
Main measuring hole
Assembly:
After installation, touch it
with fingers to confirm its
action.
Float
Float valve
Float pin
Float
chamber