Ratio io5, Installation Manual, Page: 37 / 46

Comissioning | 37
+44 (0) 1527 396900 / info@ratioev.uk / www.ratioev.uk
7.2. During charging
During a charging session, the measured power usage is displayed in kW in the Ratio EV
Charging App.
7.2.1. Charging paused
In case there is less than 6A available on the main grid, the charging session will
automatically be paused.
Switch off any power demanding devices or wait until more than 6A of power is available.
As soon as there is sufficient available power, the charging session will automatically resume.
7.3. Stop charging
The charging session will stop automatically when the EV is charged to the maximum battery
level, set in the vehicle.
You can manually stop the charging session by pushing the Stop button in the App or by
unlocking the vehicle.
1. Unplug the EV charging connector from the vehicle.
2. For socket version: Unplug the EV Charging connector from the charger.
For fixed cable version: Wrap the fixed cable around the charger and insert the connector
into the plug holder on the front of the charger.
8. Settings
To edit your settings, do the following:
1. Select My Chargers on the homepage of the app.
2. Select the charger you want to set up.
3. Tap the gear wheel icon on the bottom right of your screen.
Here you can edit the following settings:
Wi-Fi Connect your charger to a Wi-Fi Network.
Authorisation Mode Manual: start charging mode using the app.
Auto: start charging mode directly after plugging in
your vehicle.
Cable settings Select the locking procedure of your charging cable.
(socket version only)