16
Change the TX ID of the CC Transmitter
In case you experice interferences with other CC Transmitters you have to change the transmittion channel (TX ID) of your
CC transmitter.
Each CC Trasnmitter has 31 TX ID channels, the TX ID is randomly assigned, and it is saved in the memory of CC Trasnmitter.
It can be changed with a compleate discharge of the battery (not suggested) or following this procedure:
Install the CC Transmitter of
the first stage (on a tank)
open the tank
valve
close the tank
valve
On your second stage press the purge
button (usually on the front of the
second stage) and compleately purge
the pressure in the regulator before the
boot phase of the tank is finished.
Whait 30 seconds and power up the CC
Transmitter.
After a TX ID reset i a new pair with your iDive or iX3M is needed
Select RESET on your iDive or iX3M (TX ID will be set as OFF) and perform a new pairing (see dedicated chapter on this
manual)