12
Prepare the CC Transmitter for the dive
Install the CC Transmitter on the first stage
The CC Transmitter have to be installed on an HP (High pressure) port of your first stage.
Refer to the user manual of your regulator in order to find the right port on your first stage.
Install the CC Transmitter with the same technique, care and attention used to install the HP hose of your gauge.
Take care that the CC Transmitter does not mess with the other hoses of your first stage.
WARNING: Use a wrench (size 19) to tight the CC Transmitter! Grabbing the CC Transmitter from its body to tight it by hand can
seriously damage the CC Transmitter!
Always double-check that the O-ring at the end of the CC Transmitter thread is on its place, clean, not damaged and
greased. If not, change the O-ring (O-Ring HP: 8,73x1,78 NBR 70)
WARNING: If you do not know how to install an accessory to the HP port on your first stage ask your instructor !
If the CC Transmitter is damaged do not install it!
This is just an example.
Your first stage can be different.
+
+
(19)
=
=