Ratek EOM5 Analogue Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 13 of 16
Technical Specifications
Power requirements
240v AC / 100 watts
Motor
Brushless AC
Speed Controller
Solid State Analogue
Speed Range
20 to 200 RPM Variable
Drive
Belt and pulleys
Platform
350 x 350mm with Nitrile mat.
Capacity
Maximum 8kg (heavier loads will restrict the maximum speed)
Overall Dimensions
W370 x D400 x H175 mm
Nett Weight
10.2 Kg
Environmental Conditions
Suitable for use according to IEC 61010-1 standard as follows :
-
Indoor use
-
Altitude up to 2,000 Metres
-
Temperature 0° Celsius to 45° Celsius
-
Maximum relative humidity 80 % for temperatures up to 31° Celsius decreasing linearly to 50
% relative humidity at 40° Celsius
-
MAINS supply voltage fluctuations up to ±10 % of the nominal voltage
Over-voltage Category – II
Pollution Degree – 2
Disposal
At end of life, this equipment should be disposed of in an environmentally friendly way. This equipment cannot be disposed of with other general
waste, but instead taken to your local or regional waste collection facility for recycling and/or suitable treatment procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household
waste disposal service or your nearest commercial recycling centre.
EMC Conformity
AS/NZS CISPR 14.1:2010 Electromagnetic compatibility - Requirements for household appliances, electric
tools and similar apparatus – Emission. This forms the basis of compliance to the requirements of the
Electromagnetic Compatibility Framework (‘C TICK’).
