Ratek EOM5 Analogue Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 14 of 16
Ratek Service Contact Information
Ratek are here to assist you in getting the most from your Analogue Orbital Shaker. Our friendly staff can you assist you at any stage of the product
lifecycle.
If you have any concerns or questions regarding the operation of your Analogue Orbital Shaker, please contact us.
Contact Us
Ratek Instruments Pty Ltd
60 Wadhurst Dve
Boronia
Victoria 3155
Australia
Telephone : 613 9887 2161
Fax : 613 9887 2163
Email:
Web:
www.ratek.com.au
Troubleshooting
The Analogue Orbital Shaker provides a simple-to-operate user interface when used in conjunction with this User Manual.
If at any stage you experience abnormal operation (anything other than that described in this Operating Manual) this may indicate a fault condition. If
the Analogue Orbital Shaker fails to operate, this may also indicate a fault condition.
Fault conditions must be referred to an authorized service technician immediately and the equipment should be unplugged from the mains power
supply socket.
Make a written note of any abnormal operation and contact Ratek using the contact details provided in the section of this User Manual titled “Ratek
Service Contact Information” if you believe your equipment is exhibiting a fault condition.
