EN
8. USE WARNINGS
We recommend following the indications below in order to always work in safety conditions.
·
All the operations must be carried out complying strictly with the safety rules of the
country where the machine is to be installed.
·
It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations of
the pneumatic scissors.
·
The Customer undertakes to comply with and make his staff observe all the rules and
regulations in force concerning safety, prevention of accidents and health in the work
place. Therefore, the Customer assumes the responsibility to strictly follow all the rules and
regulations in force, as well as the special provisions in force in sport and public installations
the Customer declares to know after receiving all the relevant necessary information.
·
The pneumatic scissors work even without their safety protective device.
This protective
device must NEVER be removed.
·
Always check the resistance of the material to be cut and the kind of blade which is being
used.
·
The Customer shall equip his own personnel with all the individual safety protections for
the execution of the works, as well as with the ones which might be prescribed by the
Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
·
Only one operator must use the pneumatic scissors always standing behind the guide
handle. Do not make any adjustment while the blade is working.
·
Always pay attention to the position of the air pipe to prevent it from being cut or
damaged by the blade.
·
It is allowed to assemble pneumatic scissors FP503MT on machines O.E.M. on condition
that their original structure is not modified. Otherwise, the intervention must be certified by
Rasor
®
.
·
The pneumatic scissors FP503MT are equipped with double safety push button with a lever
and a ratchet on the handle: the ratchet prevents the start push button from being
enabled accidentally, the lever operates the scissors. Never remove the ratchet.
24
Enfocus Software - Customer Support
