EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a pneumatic scissor model FP503MT which is used in
order to quickly cut composite materials, in particular the carbon fibre. It is extremely versa-
tile, light and precise in the cutting operation. Thanks to the use of a supporting front foot
and of an effective cutting system with heptagonal, circular or decagonal blade, it is possible
to use the pneumatic scissors for the precise mold trimming.
One special feature of pneumatic scissors FP503MT is their ability to sharpen the blade in
each moment without disassembling it by means of a grinding wheel mounted on the scissors
head. After carrying out this operation, it is possible to start cutting again. The pneumatic
scissors are provided with a threaded connection for many air pipeline. The turbine, perfectly
balanced, with a high number of revolutions and totally free of maintenance, reduces the
vibrations and the noise to the minimum.
The pneumatic scissors can be used also outdoor and to cut damp or wet materials and
therefore particularly recommended in tannery, dyeworks and for the carbon fibre cut.
The pneumatic scissors FP503MT are extremely light (they weight only 790g) and handy and
allow carrying out quick and precise cuts, even with curve profiles. The use of compressed
air as source of energy allows working continuously without problems of heating or motor
overload. The mechanical parts are made up of steel and high resistant bronze and require
a lubrication after many working hours.
1
1/4" gas connection for the air
connector
9
Sharpening button
2
Safety device to enable the control
lever
10
Blade protection guard
3
Control lever
11
Motor support
4
Supporting foot
12
Silencer
5
Polygonal blade
13
Antifriction bush
6
Greaser
14
Reference point
7
Pneumatic motor
15
Welded counterblade
8
Sharpener
16
Allen screw to disassemble the
scissor head
Device components
2
1
3
12
4
7
5
6
8
9
10
11
13
14
15
16
22
Enfocus Software - Customer Support
