Chapter 6: KX III Remote Console - KX III End User Help
78
Scanning Ports Slide Show - Remote Console
When you start a scan, the Port Scan window opens.
As each target is found, it is displayed as a thumbnail in a slide show.
The slide show scrolls through the target thumbnails based on the
default interval of 10 seconds or according to the interval you specify.
As the scan scrolls through the targets, the target that is the focus of the
slide show displays in the center of the page.
The name of the target is displayed below its thumbnail and in the task
bar at the bottom of the window.
If a target is busy, a blank screen is displayed instead of the target server
access page.
Configure scan settings for the Remote Console from either the Virtual
KVM Client (VKC) or Active KVM Client (AKC).
See
Configuring Port Scan Settings in VKC and AKC
(on page 50)
Note: Scan port settings for the Local Console are configured on the
Local Port Settings page. See
Scanning Ports - Local Console
(on
page 89)
