Raritan dominion kx III User Manual Download Page 102

Page: 102 / 190

Chapter 7: KX III Local Console - KX III End User Help

2. From the Local Console, click Tools.

3. Select the smart card reader from the Card Readers Detected list.

Select None from the list if you do not want a smart card reader
mounted.

4. Click OK. Once the smart card reader is added, a message will

appear on the page indicating you have completed the operation
successfully. A status of either Selected or Not Selected will appear
in the left panel of the page under Card Reader.

To update the Card Readers Detected list:



Click Refresh if a new smart card has been mounted. The Card
Readers Detected list will be refreshed to reflect the newly added
smart card reader.

Summary of Contents for dominion kx III






























































































































































































Search results

Summary of Contents for dominion kx III

Reviews:

Related manuals for dominion kx III

Brands by name

Popular brands

Raritan dominion kx III, User Manual

Search results

Summary of Contents for dominion kx III

Reviews:

Related manuals for dominion kx III

Brands by name

Popular brands