Appendix C: Specifications
120
Dell Chassis Cable Lengths and Video Resolutions
In order to maintain video quality, Raritan recommends using the
following cable lengths and video resolutions when you are connecting to
Dell
®
blade chassis from the KX III:
Video resolution
Cable length
1024x768@60Hz
50' (15.24 m)
1280x1024@60Hz
50' (15.24 m)
1600x1200@60Hz
30' (9.14 m)
Smart Card Minimum System Requirements
Local Port Requirements
The basic interoperability requirement for local port attachment to the KX
III is:
All devices (smart card reader or token) that are locally attached
must be USB CCID-compliant.
Target Server Requirements
When using smart card readers, the basic requirements for
interoperability at the target server are:
The IFD (smart card reader) Handler must be a standard USB CCID
device driver (comparable to the generic Microsoft
®
USB CCID
driver).
A digital CIM or D2CIM-DVUSB (Dual-VM CIM) is required and must
be using firmware version 3A6E or later.
Blade chassis server connections, where a CIM per blade is used,
are supported.
Blade chassis server connections, where a CIM per chassis is used,
is only supported for IBM
®
BladeCenter
®
models H and E with
auto-discovery enabled.
Windows XP Targets
Windows XP
®
operating system targets must be running Windows XP
SP3 in order to use smart cards with the KX III. If you are working
with .NET 3.5 in a Windows XP environment on the target server, you
must be using SP1.
Linux Targets
