Chapter 6: Device Management
107
Modem server IP address - The address the user types to access
the KX II-101-V2 web interface once connected via modem.
Modem client IP address - The address assigned to the user
once connected via modem.
4. Click OK.
See
Modem Access Cable Connections
(on page 107) for details on
the cable connection for modem access and see
Certified Modems
(on
page 177) for details on certified modems that work with the KX II-101-
V2. For information on settings that will give you the best performance
when connecting to the KX II-101-V2 via modem, see
Creating,
Modifying and Deleting Profiles in MPC
in the
KVM and Serial
Clients Guide
.
Modem Access Cable Connections
Use the following cable connection configuration to connect the KX II-
101-V2 to a modem:
1. Connect an admin serial cable to the KX II-101-V2.
2. Connect a 9 pin male/male gender changer to the admin serial cable.
3. Connect a null modem cable to other side of the gender changer.
4. Connect the 9 pin male/male gender changer to other end of the null
modem cable.
5. Connect a DB9 to male DB25 modem cable between the null modem
cable and the modem.
Configuring Date/Time Settings
Use the Date/Time Settings page to specify the date and time for the KX
II-101-V2. There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time Protocol (NTP)
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:
User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).