5
QUICK sTART gUIDE
•
Prepare the pipe and fitting according to the manufacturer’s specification.
•
Unwind all cables from the welding unit.
•
Connect the welding cable to the fitting.
•
Connect the supply cable to the correct voltage and switch it on.
•
The unit will power up and go to the main menu.
•
Press the B Quick-key to select Automatic welding.
•
Press the D Quick key to select Bar Code welding.
•
If the unit is set to data log, enter the details as shown on the screen.
•
Read the bar code on the fitting with the pen/scanner.
•
Press the Start button.
•
The time will count down to zero as the fitting is being welded. Any faults will be
indicated on the display.
•
At the end of the weld, disconnect the welding cable to reset the unit.
•
Press the Star key to return to the main menu if required.