143
Machine No. from 10005183
EN
6.6
Additional tyres
Additional tyres improve suitability for slopes.
Mounting
• Mount attachment flange (1) on the machine.
Two tyres, wheel + cage wheel:
• Align mark (A) on the cage wheel to the attachment flange by means of the positioning
rib (B).
• Mount cage wheel on attachment flange (1) with special screw (2).
Two tyres, wheel + dual tyres:
• Mount attachment flange (3) to twin wheel with wheel nuts (4) and screws (5).
• Align positioning ribs (C) of the driver flanges to one another.
• Mount twin wheel to attachment flange (1) with screw (6). Tighten screw (6) using a
suitable tool (7).
Note
For the twin wheel, you can choose between the two attachment flanges 60 mm and 114
mm.
Warning
The machine may suddenly trap the user or third persons, cause them to fall over or run
them over.
• No more than two tyres are permitted on one side.
