141
Machine No. from 10005183
EN
5.13
Stationary operation (option)
In stationary operation, the PTO shaft drive can be operated without actuating the dead
man handle. If the dead man handle is actuated, the PTO shaft drive deactivates.
The safety catch (1) must also be actuated in order to press the switch.
6
Optional
6.1
Tool box
The tool box allows the tool to be stored.
6.2
Winter plating
The winter plating prevents icing of the carburettor.
During summer operation the winter plating must be dismounted.
6.3
Operational hour counter
The operational hour counter counts the operating hours and records the engine speed
(LCD display).
The operating hours can only be read if the engine is switched off. While the engine is
running, the engine speed is shown. The operational hour counter cannot be reset. It has its
own battery welded to the housing.
6.4
Main nozzle set ( spark plug)
Running engines at high altitudes will result in a loss of performance. This is caused by
overlubrication in some operating states as a result of the change in the mixing ratio due to
the lower air weight.
This problem can be prevented by mounting the main nozzle set.
Stationary operation deactivated
Stationary operation activated
1
1
Warning
The machine may suddenly trap the user or third persons, cause them to fall over or run
them over.
• In stationary operation, only attachments approved by Rapid may be operated.
Note
It is assumed that you have read and understood the chapters "First things first" and "Safe
operation".
