Ransomes MT503, Safety, Operation & Maintenance Manual/Parts List

Page: 24 / 132

en-24
4 SPECIFICATIONS
4.7 CUTTER UNIT SPECIFICATION _________________________________________
4.8 CUTTING PERFORMANCE _____________________________________________
50 cuts per metre at 12km/hr with 8 knife cylinders.
37 cuts per metre at 12km/hr with 6 knife cylinders.
25 cuts per metre at 12km/hr with 4 knife cylinders.
3.78 hectares/hr.at 12km/hr. (9.3 acres/hr at 7.5 mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
Magna 250
Construction Heavy duty welded pressed steel construction
Blade Length 762mm (30”)
Number of Blades 4 / 6 /8
Cylinder Diameter (New) 254mm (10”)
Minimum Cylinder Diameter
(Before Replacement)
235mm (9.25”)
Height of Cut 12.7mm - 61mm (0.5”- 2.4”)
Height of Cut Adjustment Adjustable screw system on rear roll
Rear Roll 76mm (3”) Diameter
Maximum Cylinder Speed at Maximum
Engine rpm
1250rpm ± 100
Transmission By direct drive through splined hydraulic motor
MT FLAIL
Construction Heavy duty welded pressed steel construction
Blade Length 59mm (2.3”)
Number of Blades 14
Rota shaft Assembled Diameter (New) 265mm (10.4”)
Minimum Blade length
(Before Replacement)
54mm (2.1”)
Height of Cut 25mm-71mm (1” - 2.8”)
Height of Cut Adjustment Adjustable screw system on rear roll
Rear Roll 76mm (3”) Diameter
Maximum Rota Speed at Maximum Engine
rpm
3/-100
Transmission By direct drive through splined hydraulic motor