NOTE
There is only one way to install the motor.
NOTE
Only one way to position
Re-assembly
1. Install porting block on motor. Align screw heads
into porting recess.
2. Align motor slots with 3 tab arms.
3. Install cartridge then o-ring (if removed).
4. Install screw and retainer.
5. Install light pipe.
When re-assembling the rear cover carefully
insert the wires so they are not pinched during
re-assembly.
CAUTION
!
AH-17-04-R0.0 (11/2017)
37 / 59
www.carlisleft.com
MAINTENANCE
