ATEX REQUIREMENTS
Requirements
These applicators are FM approved when the
product setup is configured to drawings shown on
the following pages. This product is approved for use
only with non-flammable water-based materials when
the materials meet the FM definition for a waterbased
spray material*. It is the end users’ responsibility
to insure the material that is sprayed meets this
requirement.
* FM 7260 waterbased spray material - a material that
does not sustain burning when tested in accordance
with ASTM D 4206.
ATEX Requirements
This product provides a direct charge to water based
materials that will improve the transfer efficiency
over non-electrostatic products. Because it is direct
charge, the fluid delivery system must be isolated
from ground to allow proper electrostatic charging of
the fluid.
FM REQUIREMENTS
80777-11
80777-12
By Ransburg
®
AH-17-04-R0.0 (11/2017)
9 / 59
www.carlisleft.com
ATEX
