10. Install Bellville washers in sequence shown.
11. Install rear nut. Install jam nuts finger tight.
12. Set air before fluid adjustment.
13. Tighten jam nuts.
Re-Install Needle Shaft Into Barrel
1. Install needle shaft into barrel with die-electric
grease.
2. Tighten packing using wrench. Pull back and forth
on the needle shaft till a slight amount of drag is felt.
0
3. Squeeze approximately
1/3 tube of LSCH0009-
00 dielectric grease in
the cascade pocket.
AH-17-04-R0.0 (11/2017)
34 / 59
www.carlisleft.com
MAINTENANCE
