LN-9214-00.2
Electrical
Electrical
Electrical
Electrical
Electrical
Power Required:
Power Required:
Power Required:
Power Required:
Power Required:
24 VDC at 80 mA
SIGNAL LEVELS
SIGNAL LEVELS
SIGNAL LEVELS
SIGNAL LEVELS
SIGNAL LEVELS
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
- Compatible with Allen-Bradley RIO
- RIO termination resistor is switchable option on DAIF
DIGITAL MODE (Communication with 75119-02 Digital Module)
DIGITAL MODE (Communication with 75119-02 Digital Module)
DIGITAL MODE (Communication with 75119-02 Digital Module)
DIGITAL MODE (Communication with 75119-02 Digital Module)
DIGITAL MODE (Communication with 75119-02 Digital Module)
Output:
Output:
Output:
Output:
Output:
5 V signal level: 8-bit data bus, 12 discrete outputs (10 Strobe, 2
Lockout)
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
Up to 82 points in output address, 3/4 logical rack
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
Up to 41 points in output address, 1/2 logical rack
Application:
Application:
Application:
Application:
Application:
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
DGNA communicates to up to five Digital Modules via 74847, mother
board, and up to five additional Digital Modules in second 74847,
mother board, via DACAB. One DAIF (Digital configuration) is
required for each DGNA and one DACAB is used to connect between
DAIF and second mother board. The slot 5 and slot 10 Digital
Modules may be replaced by A10204-01, Discrete Modules, when
74787-00S, mother board, is used.
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
DGNA communicates to up to five Digital Modules via 74847, mother
board. One DAIF (Digital configuration) is required for each DGNA.
ATOMIZER MODE
ATOMIZER MODE
ATOMIZER MODE
ATOMIZER MODE
ATOMIZER MODE
Output:
Output:
Output:
Output:
Output:
5 V signal level: 8-bit data bus, 30 discrete outputs (10 Strobe, 20
Function Select)
0-10 V signal level: 20 analog outputs
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
PLC I/O:
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
Up to 10 BTW (speed command), 30 BTR (status/speed feedback/
pressure feedback), 1/2 logical rack
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
Up to 5 BTW (speed command), 15 BTR (status/speed feedback/
pressure feedback), 1/4 logical rack
Application:
Application:
Application:
Application:
Application:
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
(Max. Mode):
DGNA communicates to up to five 74944, Atomizer Modules, via
74847, mother board, and up to five additional Atomizer Modules in a
second 74847, mother board, via DACB. One DAIF (Atomizer config-
uration) is required for each DGNA and one DACB is used to connect
between DAIF and second mother board.
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
(Min. Mode):
DGNA communicates to up to five 74944, Atomizer Modules, via
74847, mother board. One DAIF (Atomizer configuration) is required
for each DGNA.
DIAGNOSTIC
DIAGNOSTIC
DIAGNOSTIC
DIAGNOSTIC
DIAGNOSTIC
RS-422 port, manual input/output capability, may be used as main
communication port
Digital Node Adapter - Introduction
5
5
5
5
5
Summary of Contents for 75584
Page 4: ......