background image

These  warnings  are  provided  in  the  interests  of  safety.  Ensure  that  you  understand
them all before installing or using this appliance. Your safety is of paramount importance.
If you are unsure about the meaning of any of these warnings contact the Helpline.

INSTALLATION

Any installation work must be
undertaken by a qualified electrician or
a competent person.

This hood must be installed in
accordance with the installation
instructions and all measurements
must be adhered to.

If the cooker hood is installed for use
above a gas appliance then the
provision for ventilation must be in
accordance with the latest edition of
the Gas Safety Codes of Practice and
the Gas Safety (Installation & Use)
Regulations, the Building Regulations
issued by the Department of the
Environment, the Building Standards
(Scotland) (Consolidated) Regulations
issued by the Scottish Development
Department.

The fan motor of this cooker hood
incorporates a cut-out device which will
operate if the cooker hood is installed
below the minimum height
recommended under the section
‘Clearance Height’, or if the motor
becomes overheated. If the cut-out
device is activated, switch off the fan
motor and allow the cooker hood to
cool. The cut-out device will reset itself
when the fan motor has cooled
significantly.

It is dangerous to alter the
specifications or modify this product in
any way.

When installed between adjoining wall
cabinets the wall cabinets must not

overhang the hob.

IMPORTANT SAFETY INFORMATION

If the room where the cooker hood is to
be used contains a fuel burning appliance
such  as  a  central  heating  boiler  then  its
flue  must  be  of  the  room  sealed  or
balanced flue type.

If  other  types  of  flue  or  appliances  are
fitted  ensure  that  there  is  an  adequate
supply of air to the room.

The  ducting  system  for  this  appliance
must  not  be  connected  to  any  existing
ventilation system that is being used for
any other purpose.

Do not install above a cooker with a high-
level grill.

CHILD SAFETY

This appliance is designed to be operated
by adults. Children should not be allowed

to tamper with the appliance.

DURING USE

This product is for domestic use only.

Never leave frying pans unattended during
use  as  overheated  fats  and  oils  might
catch fire.

Never  do  flambé  cooking  under  this
cooker hood.

Do  not  leave  naked  flames  under  the
cooker hood.

2

Summary of Contents for LEIHDS120SC

















Reviews: