background image

Regular maintenance and cleaning will ensure good performance and reliability, while
extending the working life of the hood. Special attention should be paid to the grease

filter cassettes and the charcoal filter when the hood is used in the recirculation mode.

Before  carrying  out  any  mainte-

nance or cleaning isolate the cooker hood

from the mains supply.

METAL GREASE FILTERS

The  grease  filters  absorb  grease  and  dust
during cooking to help keep the chimney hood
clean  inside,  and  should  be  cleaned  every
month with normal usage or more frequently
if the hood is used consistently over 4 hours
per day.

Remove  the  metal  grease  filter

cassettes  one  at  a  time,  by  pressing  the
release catch towards the rear of the hood
as  illustrated  opposite.  When  replacing  the
filters ensure that the handle faces forwards.

The metal grease filters can be washed in a
dishwasher or by hand using a mild detergent

or liquid soap.

CHARCOAL FILTER

In  the  recirculation  mode  the  activated
charcoal filter absorbs smells and unwanted
odours.

The  charcoal  filter  cannot  be  cleaned  or
regenerated and must be replaced every four
months, or more frequently if the hood is used
consistently over 4 hours per day.

To  replace  the  charcoal  filter,  first

remove  the  metal  grease  filters  and  press
against the plastic retaining clips to remove

the charcoal filter as illustrated opposite.

We recommend that you wear rubber gloves
when removing the charcoal filter as the filter
will be saturated in grease. Put the filter into
a  polythene  bag  or  container  so  that  the
grease and dirt cannot spill onto clothing of

furnishing.

MAINTENANCE AND CLEANING

THIS  APPLIANCE  CAN  BE  A

POSSIBLE FIRE HAZARD IF THE GREASE
FILTERS  ARE  NOT  CLEANED  AND  THE
CHARCOAL  FILTERS  REPLACED  AS

RECOMMENDED.

Replacement  charcoal  filters  may  be
purchased  by  returning  the  enclosed  order
form, or by telephoning 01803 296155 if you

wish to pay by credit card.

6

Summary of Contents for LEIHDS120SC

















Reviews: