Rane SIXTY-EIGHT Operator'S Manual Download Page 55

Page: 55 / 60

Fader Assembly Removal

Remove all five fader knobs.

Remove all four screws holding the

fader panel face plate.

Lift up the fader panel face plate and

set it aside where it can’t get damaged.

Remove the two screws in the main

panel at the top of the fader assembly.

Remove the two screws at the front of

the fader assembly.

Slide the fader assembly out just

enough to see the three white and blue
wires and their connectors.

Unplug the connectors of the three

white and blue wires.

Slide out the fader assembly

completely.

The channel faders are mounted in

pairs. Remove the four screws for each
pair of faders (1 and 2) or (3 and 4).

The magnetic crossfader may be

removed by the two screws at each end
of the crossfader.

Reverse this procedure to re-assemble.

• Plug in all three cables before installing

screws.

• Confirm cables are not crossed, with

faders 1 & 2 on the left connector, faders
3 & 4 on the right connector, and the
blue crossfader wires in the center.

• Test all the faders before installing the

fader panel face plate and fader knobs.

RANE SIXTY-EIGHT MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

Summary of Contents for SIXTY-EIGHT





























































Search results

Summary of Contents for SIXTY-EIGHT

Reviews:

Related manuals for SIXTY-EIGHT

Brands by name

Popular brands

Rane SIXTY-EIGHT, Operator'S Manual

Search results

Summary of Contents for SIXTY-EIGHT

Reviews:

Related manuals for SIXTY-EIGHT

Brands by name

Popular brands