R&S SMW-K555, User Manual

Page: 42 / 45

Remote control commands
R&S
®
SMW-K555
42 User Manual 1179.5776.02 ─ 01
Manual operation: See "State" on page 29
See "Align Date / Time" on page 37
5.2 Alignment commands
The
SCONfiguration:BEXTension:ALIGn
subsystem contains the commands for
aligning a bandwidth extension setup.
Example: Aligning the bandwidth extension setup and RF ports
SCONfiguration:BEXTension:ALIGn:STATus?
// Repsonse: "NALigned"
// Setup is not aligned. Align the setup using the "Align Setup Wizard".
SCONfiguration:BEXTension:ALIGn:STATus?
// Repsonse: "ALIGned"
// Setup is aligned. Continue with alignment of the RF ports.
SCONfiguration:BEXTension:ALIGn:RFPorts
// Triggers RF ports alignment.
SCONfiguration:BEXTension:STATe 1
Commands
:SCONfiguration:BEXTension:ALIGn:RFPorts
..................................................................... 42
:SCONfiguration:BEXTension:ALIGn:STATus?
.................................................................... 42
:SCONfiguration:BEXTension:ALIGn:RFPorts
Triggers alignment of the RF ports and considers cable length corrections.
Example: See Example "Aligning the bandwidth extension setup and RF
ports" on page 42.
Usage: Event
Manual operation: See "Align RF Ports" on page 30
:SCONfiguration:BEXTension:ALIGn:STATus?
Queries the alignment status of the bandwidth extension setup.
Return values:
<AlignedStatus> NALigned | ALIGned
NALigned
Setup is not aligned.
ALIGned
Setup is aligned.
*RST:
NALigned
Example: See Example "Aligning the bandwidth extension setup and RF
ports" on page 42.
Alignment commands