R&S SMW-K555, User Manual

Page: 33 / 45

Bandwidth Extension settings
R&S
®
SMW-K555
33 User Manual 1179.5776.02 ─ 01
Settings:
Number of Ports ............................................................................................................ 33
Resulting Bandwidth ..................................................................................................... 33
Maximum Center Frequency .........................................................................................33
Scan Instrument ............................................................................................................ 33
RF port table ................................................................................................................. 33
└ Port Name .......................................................................................................33
└ RF Source .......................................................................................................33
└ Hostname / IP Address ................................................................................... 33
└ Maximum Frequency ...................................................................................... 33
└ Remote Status ................................................................................................ 34
Number of Ports
Displays the number of RF ports.
Resulting Bandwidth
Displays the resulting bandwidth that is the extended bandwidth.
Maximum Center Frequency
Displays the maximum center frequency of the combined signal with extended band-
width.
Scan Instrument
Scans the network for connected, supported instruments.
RF port table
Represents the RF ports configuration; there is one table row per RF port.
Port Name ← RF port table
Add an alias name for the RF port.
Remote command:
n.a.
RF Source ← RF port table
Indicates the physical instrument which the RF port belongs to.
Remote command:
n.a.
Hostname / IP Address ← RF port table
Displays/sets the IP address or hostname of the connected external instrument.
Remote command:
n.a.
Maximum Frequency ← RF port table
Displays the maximum frequency at the RF port.
Remote command:
n.a.
Setup file editor settings