Extending the bandwidth
R&S
®
SMW-K555
26
User Manual 1179.5776.02 ─ 01
1
3
4
2
5
6
Figure 3-4: Active bandwidth extension and R&S
SMW block diagram
1 = One baseband block for both signal paths "A" and "B"
2 = Configurable settings for signal path A
3 = Configurable output "RF A" for signal path A
4 = Read-only output "RF B" for signal path B
5 = Read-only settings for signal path B
6 = "Bw Ext" softkey displaying an aligned setup
To generate an ARB signal with extended bandwidth
The R&S
SMW is configured and aligned for bandwidth extension. Also bandwidth
"To activate a bandwidth extension setup"
1. Select "Baseband > ARB".
2. In the "General" tab, load a waveform file with extended bandwidth.
Generating signals with extended bandwidth
