R&S SMCVB-K156, User Manual

Page: 18 / 79

T-DMB/DAB Configuration and Settings
R&S
®
SMCVB-K156
18 User Manual 1179.1029.02 ─ 02
Set To Default
Calls the default settings. The values of the main parameters are listed in the following
table.
Parameter Value
State Not affected by the "Set to Default"
Remote command:
[:SOURce<hw>]:BB:TDMB:PRESet
on page 49
Save/Recall
Accesses the "Save/Recall" dialog, that is the standard instrument function for saving
and recalling the complete dialog-related settings in a file. The provided navigation
possibilities in the dialog are self-explanatory.
The filename and the directory, in that the settings are stored, are user-definable; the
file extension is however predefined.
See also, chapter "File and Data Management" in the R&S SMCV100B user manual.
Remote command:
[:SOURce<hw>]:BB:TDMB:SETTing:CATalog?
on page 49
[:SOURce<hw>]:BB:TDMB:SETTing:DELete
on page 50
[:SOURce<hw>]:BB:TDMB:SETTing:LOAD
on page 50
[:SOURce<hw>]:BB:TDMB:SETTing:STORe
on page 50
4.2 Input Signal Settings
Access:
► Select "Baseband > T-DMB/DAB > Input Signal".
The dialog provides access to settings necessary to configure the input signal.
Input signal tasks
The settings allow you to perform the following tasks:
●
Selecting an ETI source (external ETI Input, TS player as ETI player or internal ETI
test signal).
●
Displaying information about the selected ETI signal (e.g. MID , NST )
How to: Chapter 5.1, "Configuring the Input Signal" , on page 43 .
An external ETI signal (physical HDB3 -coded) can be fed in at the "User 1" connector.
Input Signal Settings