R&S SMCVB-K156, User Manual

Page: 67 / 79

Remote-Control Commands
R&S
®
SMCVB-K156
67 User Manual 1179.1029.02 ─ 02
:TSGen:CONFigure:SEEK:RESet
Resets the following parametets to their default state:
●
:TSGen:CONFigure:SEEK:STARt
on page 67
●
:TSGen:CONFigure:SEEK:STOP
on page 67
Example: See Example "Play a TS player file" on page 62.
Manual operation: See "Reset Window" on page 35
:TSGen:CONFigure:SEEK:STARt <Start>
Sets an individual start time.
You can select a value in a 10-hour range.
Parameters:
<Start> float
Range:
0 to 36000000
Increment: 0.1
*RST:
0
Example: See Example "Play a TS player file" on page 62.
Manual operation: See "Start [hh:mm:ss.fff]" on page 34
:TSGen:CONFigure:SEEK:STOP <Stop>
Sets an individual stop time.
You can select a value in a 10-hour range.
Parameters:
<Stop> float
Range:
0 to 36000000
Increment: 0.1
*RST:
23040.2
Example: See Example "Play a TS player file" on page 62.
Manual operation: See "Stop [hh:mm:ss.fff]" on page 34
:TSGen:CONFigure:STOPdata <StopData>
Ensures that a standardized TS data stream is always output at the TS output at the
rear of the R&S SMCV100B.
Parameters:
<StopData> TTSP | NONE
*RST:
NONE
Example: See Example "Configure and monitor TS player output"
on page 63.
TSGen Subsystem