R&S SMCVB-K156, User Manual

Page: 34 / 79

T-DMB/DAB Configuration and Settings
R&S
®
SMCVB-K156
34 User Manual 1179.1029.02 ─ 02
File extension Stream libraries Remark Option
*.trp - Unencrypted -
*.trp_c - Encrypted
Included in various stream
libraries
R&S SMCVB-KS12
R&S SMCVB-KS17
R&S SMCVB-KS18
R&S SMCVB-KS19
R&S SMCVB-KS20
*.bin - Unencrypted -
*.ts - Unencrypted -
*.mpg - Unencrypted -
*.t10
- - -
1)
For T2MI stream files, the data rate of a T2MI file is determined automatically, if the
following applies:
●
Data rate is not part of the TRP file header information.
●
PCR information is not available.
●
T2MI TRP file is not encrypted, that means not of type
*.t2mi_c
.
●
TRP file has the
*.t2mi
file extension.
Remote command:
:TSGen:CONFigure:PLAYfile
on page 65
:TSGen:READ:PLAYfile:LENGth?
on page 69
:TSGen:READ:FMEMory
on page 68
Start [hh:mm:ss.fff]
Sets the start position in the loaded player file. Data which chronologically precedes
the start position is not replayed by the player.
The entered time stamp must chronologically always precede the entry under Stop .
Remote command:
:TSGen:CONFigure:SEEK:STARt
on page 67
Position Player [hh:mm:ss.fff]
Displays the current play position in the file.
Remote command:
:TSGen:CONFigure:SEEK:POSition
on page 66
Stop [hh:mm:ss.fff]
Sets the end position in the player file. Data which chronologically follows the end posi-
tion is not replayed by the player.
When the player reaches the "Stop" position, it returns to the "Start" position (continu-
ous play).
The entered time stamp must chronologically always follow the entry under Play .
Remote command:
:TSGen:CONFigure:SEEK:STOP
on page 67
TS Player