R&S SMCVB-K156, User Manual

Page: 69 / 79

Remote-Control Commands
R&S
®
SMCVB-K156
69 User Manual 1179.1029.02 ─ 02
Parameters:
<FMemory> integer
Range:
0 to 10
*RST: 0
Example: See Example "Configure and monitor TS player output"
on page 63.
Manual operation: See "Select File" on page 33
:TSGen:READ:ORIGtsrate <ORIGtsrate>
Displays the calculated original TS data rate.
Parameters:
<ORIGtsrate> integer
Range:
1 to 350000000
*RST: 5018502
Example: See Example "Configure and monitor TS player output"
on page 63.
Manual operation: See "Orig. Data Rate" on page 36
:TSGen:READ:PLAYfile:LENGth?
Queries calculated original loop time.
Return values:
<Length> integer
Range:
0 to 100
*RST: 0
Example: See Example "Configure and monitor TS player output"
on page 63.
Usage: Query only
Manual operation: See "Select File" on page 33
6.7 BCIP Subsystem
The
SYSTem:COMMunicate:BCIP
subsystem contains the commands for configuring
local IP data network parameters.
Common suffixes
The following common suffixes are used in the remote commands:
BCIP Subsystem