R&S SMCVB-K156, User Manual

Page: 36 / 79

T-DMB/DAB Configuration and Settings
R&S
®
SMCVB-K156
36 User Manual 1179.1029.02 ─ 02
Settings:
4.7.2.1 General
The tab provides settings necessary to configure general player output properties.
Data Rate ...................................................................................................................... 36
Orig. Data Rate ............................................................................................................. 36
Packet Length ............................................................................................................... 36
Nullpacket Stuffing ........................................................................................................ 37
Stop Data ...................................................................................................................... 37
Data Rate
Sets the output data rate of the player.
Note: If "Nullpacket Stuffing > Off", we recommend that you set the output data rate
equal to the original data rate.
If you want to use a different data rate, activate "Nullpacket Stuffing". The function
ensures that the data stream is replayed in the same way as it was recorded. The time
references in the tables of the TS stream are also correct during replay.
Remote command:
:TSGen:CONFigure:TSRate
on page 68
Orig. Data Rate
Displays the calculated original TS data rate.
Remote command:
:TSGen:READ:ORIGtsrate
on page 69
Packet Length
Requires a
*.trp
,
*.trp_c
,
*.emc
or
*.emc_c
file loaded into the "TS Player" dia-
log.
*.trp
files are previously recorded files.
Displays the packet length of the loaded TS player file.
Remote command:
:TSGen:CONFigure:TSPacket
on page 68
TS Player